CANOGA PERKINS 3240S SNMP Managed Fiber Optic Multiplexer - Manual (Page 62)

3240S F I B E R O P T I C M U L T I P L E X E R
3240S Fiber Optic Multiplexer
4.8.7 Reset SNMP Agent Board
To reset (reboot) the Management Module, select '8' or System Reset, then 'Enter' from the SNMP Agent Configuration menu.
When the SNMP Agent Board Reset Screen appears as referenceded in Figure 4-17, enter Y (yes) at the prompt to reset
(reboot) the Management Module. The system will reboot and any new parameters saved in non-volatile RAM will become
active.
Figure 4-17
SNMP Agent Board Reset Screen
4-20