CANOGA PERKINS 3240S SNMP Managed Fiber Optic Multiplexer - Manual (Page 90)

3240S F I B E R O P T I C M U L T I P L E X E R
3240S Fiber Optic Multiplexer
6.2 Electrical Interface
Interfaces Supported: DS-1 T1, E1, CCITT V.35, EIA-232, EIA-422
3240S Interface Connectors:
DS-1 T1 Female; 15-pin D-type and 8-pin RJ-48C
E1 Female, 15-pin D-type, 25 Pin D-type (both120 ohm impedance)
and Dual BNC (75 ohm impedence)
CCITT V.35, MDS0 Female, 34-pin MRC-type (MR34)
Power Requirement: 115 AC ±10% @ 0.5 amp
230VAC @ 0.25 amp (optional)
47 to 63Hz (both)
-48VDC (optional)
NMS: Male, 9-pin D-type, EIA-232
RJ-45, 8-pin modular jack, (10BASE-T)
6.3 Dimensions/Environmental
Stand alone: 3.5" H x 17" W x 13.5" D
Weight: 11 lbs (3.6kg) [shipping = 11 lbs]
Temperature: 0 to 50°C
Humidity: 0 to 95% (non-condensing)
6.4 Regulatory Compliance
• UL 1950/CSA C22.2 No950
• FCC Part 15 Class A (pending)
• EN 60950
• IEC 60950
• EN 55022, EN 50081-1 (pending)
6-2