2 i/o port configuration/status, 2 i/o port configuration/status -27 – CANOGA PERKINS 3240S SNMP Managed Fiber Optic Multiplexer User Manual
Page 69
Advertising
3240S F I B E R O P T I C M U L T I P L E X E R
3240S Fiber Optic Multiplexer
4.9.2 I/O Port Configuration/Status
To configure the I/O Port Configuration, select '2' or I/O Port, then 'Enter' from the 3240S Multiplexer Configuration/Status
menu. The I/O Port Module and Logical Address Screen will appear as referenced in Figure 4-24.
Select the desired slot number in order to view the current status of the selected slot. The Link Configuration / Status Screen
will appear as shown in Figure 4-26. User options accessible from this screen are defined in Figure 4-25.
Figure 4-25
3240S Unit/Slot Link
Configuration/Status
Figure 4-24
I/O Port Module and
Logical Address Screen
4-27
Advertising