360 Systems DigiCart/II Plus - Manual (Page 27)

DigiCart/II Plus Owner's Manual Controls and I/O • 15
The RECORD Button
(Illuminates when enabled)
When you press the RECORD button DigiCart/II Plus will:
Allocate blank disk space for recording.
Turn on the Input Monitor function and enter the Record Ready mode.
Pressing the PLAY button will initiate recording and illuminate the PLAY button,
unless a threshold level is set.
If a threshold level is set, recording starts when the level of the audio input exceeds the
THRESHOLD setting. Audio will be recorded at the sampling rate and recording format
currently selected in the SETUP MENU. If using digital inputs, the sampling rate will be
automatically set at the same sampling rate as that of the incoming signal.
The PLAY Button
(Illuminates when enabled)
Press the PLAY button to initiate playback of a cut or stack.
Subsequent presses of the PLAY button will cause the next cued selection to play
immediately or on completion of the current one, dependent on the RESTART
MODE.
A blinking PLAY button indicates another cut is ready for Follow-On play or that
Loop Playback is active.
A solid PLAY button indicates DigiCart/II Plus will stop after the current cut.
The STOP Button
(Illuminates when enabled)
When the PLAY button is illuminated, pressing the STOP button ONCE will:
Terminate playback or recording.
When in follow on play, playing a stack, or loop playback, will end playback upon
completion of the present cut.
Press the STOP button TWICE to:
End both the present cut and others selected for follow-on play.
Holding the STOP button in will:
Display the drive or disk number and name.
Display the available recording time remaining on the drive based on the currently
selected recording format.
The UTILITY MENU Button
(Illuminates when enabled)
Press the UTILITY MENU button to:
Enable the selection of drive, directory, cut and stack management functions.
After pressing, rotate the SELECT knob to view your options. Press the ENTER
button to initiate the chosen function, or CANCEL, STOP or PLAY buttons to
terminate the selection.