Pause, Playing multiple cuts — follow-on play, Pressing pause in play mode – 360 Systems DigiCart/II Plus User Manual

Page 38: Pressing pause in record mode

Advertising
background image

26

Operating Instructions

DigiCart/II Plus Owner's Manual

Playing Multiple Cuts — Follow-On Play

In Follow-On Play, a second cut may be selected and queued to play while a cut is currently
playing.

NOTE: For Follow-On Play, the RESTART MODE selection in the SETUP MENU must be
set to “ON COMPLETION”.

While a cut is playing, use the navigation controls to select another cut from any drive or directory.

Press the PLAY button to set Follow-On play. The PLAY button will blink indicating that another cut
has been selected for immediate Follow-On play.

You may select as many cuts as you wish for automatic Follow-On Play by repeating steps 1 and 2
above. The last selected cut will be visible in the first line of the display; the second line shows name
and time information about the cut that is currently playing. This queue is essentially an unsaved
Playlist.

While it is not mandatory, it is recommended that only files of the same sample rate be used for follow-
on play operations and stacks. Keeping the same sample rate in all recordings avoids the possibility of
an audible ‘pop’ as the sample rate changes from cut to cut during playback of stacks with multiple
sample rates.

To see the list of queued cuts following the one now playing:

1. Press the VIEW LIST button.

2. Use the SELECT control to scan the list.

To cancel an automatic Follow-On playlist:

3. Press the STOP button once.

The PLAY button will go solid, indicating that DigiCart/II Plus will discontinue playback at the end
of the current cut.

Press the STOP button twice to immediately cancel playback of all cuts including the current cut.

Pause

Temporarily interrupts recording or playback of a cut. It is also used to create Playlists. (See
Quickstack in the next Chapter).

Pressing Pause In Play Mode

1. Begin playback of the cut by pressing the PLAY button.

2. At any point during playback, press the PAUSE button to interrupt. The Pause

button will illuminate to show that DigiCart/II Plus is in Pause.

3. To continue playback, press the PAUSE button again. The button will go dark and

playback will resume.

Pressing Pause In Record Mode

1. Begin recording of the cut by pressing the PLAY button.

2. At any point during the recording, press PAUSE to interrupt. The Pause button

will illuminate to show that DigiCart/II Plus is in Pause.

Advertising