360 Systems DigiCart/II Plus - Manual (Page 51)

DigiCart/II Plus Owner's Manual Operating Instructions • 39
OR
DIGITAL INPUT TYPE
IEC-958 TYPE II BNC
NOTE: The Display describes the input type and the connector interface. See The Rear Panel,
pg. 18.
Audio Input Type
Selects between analog or digital inputs. The DigiCart/II Plus can output audio on all output
connectors simultaneously. Analog output is always available on the analog connectors.
1. Press the SETUP MENU button and use the selection controls to choose either:
AUDIO INPUT TYPE
DIGITAL
OR
AUDIO INPUT TYPE
ANALOG
2. If desired, use the Left and Right POSITION buttons to select the alternate menu
selection.
3. Press the ENTER button to confirm your selection.