360 Systems DigiCart/II Plus - Manual (Page 32)

20 • Controls and I/O DigiCart/II Plus Owner's Manual
may be used to provide flag codes or a status output for interface with show controllers, automation
systems, or lighting and special effects devices.
The secondary cue output appears on a female 25-pin "D" connector on the rear panel. Both
normally open and normally closed contacts are provided. These low voltage relays are designed to
switch a maximum of 28V at 500mA. Refer to the schematic of DigiCart/II's interface circuits in
Appendix A, Interface Schematics.
Alphanumeric Keyboard
An alphanumeric keyboard may be connected to the 6-pin mini-DIN KEYBOARD rear panel
connector on your DigiCart/II Plus for controlling the machine and adding names to cuts,
directories, stacks and disks. Available models include a standard 101-key PC-AT style keyboard,
a small footprint mini-keyboard (Model RC-205), or an infrared-linked mini-keyboard available
from 360 Systems. Contact your 360 Systems Dealer for details on these accessories.
The SETUP MENU must be set to your choice of the standard 101-key PC-AT style keyboard or
mini-keyboard types. See Keyboard Type on page 35 for instructions.