360 Systems DigiCart/II Plus - Manual (Page 28)

16 • Controls and I/O DigiCart/II Plus Owner's Manual
The SETUP MENU Button
(Illuminates when enabled)
Press the SETUP MENU button for:
Access to functions related to audio behavior of your DigiCart/II Plus.
Rotate the select knob to view your options. (The Setup settings are stored in non-
volatile memory.)
The EDIT MENU Button
(Illuminates when enabled)
Press the EDIT MENU button for:
Access to non-destructive editing functions.
To edit a playlist. Rotate the select knob to your view options.
The ENTER Button
Press the ENTER button to:
Confirm, continue or complete an operation.
Save a playlist.
Note: Throughout this manual, the button will be referred to simply as the ENTER button.
The CANCEL Button
Press the CANCEL button to:
Cancel or abort an operation.
Answer “no” to a query from the display.
Note: Throughout this manual, the button will be referred to simply as the CANCEL button.
The VIEW LIST Button
(Illuminates when enabled)
Press the VIEW LIST button to:
View the contents of a stack.
View the contents of the playlist during follow on playback.
The SEC Button
(Illuminates when enabled)
Press the SEC button to:
Write a secondary cue. A secondary cue is a contact closure created for control
applications. During RECORD, PLAY or EDIT of a cut, both the press and release
of the SEC button are stored and determine the duration of the Secondary cue. The
SEC button will illuminate when pressed and throughout the duration of a
Secondary cue. Only one Secondary cue can be recorded per cut. To change the
timing of a Secondary cue, simply re-record it. To delete it from the selected cut,
hold CANCEL and press SEC while in STOP mode. (See Appendix A for wiring
details.)