Truncate, Change stack type – 360 Systems DigiCart/II Plus User Manual
Page 84
72
•
Stack Mode
DigiCart/II Plus Owner's Manual
Truncate
Deletes all items following the current selection. From the Scan Mode:
1. Press the ENTER button.
2. Select TRUNCATE.
3. Press the ENTER button again. The display reads:
X.XXXX (NAME)
TRUNCATE
4. Press ENTER to activate. DigiCart/II Plus returns to the Scan Mode.
5. Press ENTER to continue editing or press the CANCEL button to exit the stack
Edit Menu. The display prompts:
X.XXXX (NAME)
SAVE CHANGES?
Y/N
6. Press the ENTER button to save or the CANCEL button to exit. DigiCart/II Plus
returns you to the Stack Directory.
Change Stack Type
Switches between Linear and Rotating Stack types. From the Scan Mode:
1. Press ENTER.
2. Select CHANGE STACK TYPE. Press the ENTER button. The display prompts:
LINEAR
SELECT WITH ARROWS
3. Press either the LEFT/RIGHT POSITION buttons to change stack type.
4. Press the ENTER button to continue editing or press the CANCEL button to exit
the stack Edit Menu.
5. The display prompts:
ROTATING
SAVE CHANGES?
Y/N
6. Press ENTER to Save and exit or CANCEL to exit.
NOTE: A looped Linear Stack may not be converted to a Rotating Stack.