360 Systems DigiCart/II Plus - Manual (Page 41)

DigiCart/II Plus Owner's Manual Operating Instructions • 29
Setup Menu Operations
The SETUP MENU structures the operational behavior of your DigiCart/II Plus when recording
and playing cuts and includes functions relating to general machine usage. SETUP MENU
selections are stored in non-volatile memory. The most recently selected values will remain until
you decide to change them.
General Operations
Most SETUP MENU activities use identical steps. The general procedure is:
1. Press the SETUP MENU button.
2. Rotate the SELECT control to choose the option you wish to adjust.
3. Use POSITION buttons to select a new value for the option.
4. Press the ENTER button to confirm and exit or press the CANCEL, STOP or
PLAY buttons to exit.
You can adjust several options and then confirm or cancel all of them at once.
Default values for SETUP MENU functions are:
SAMPLE RATE & FORMAT DOLBY AC-2 48,000 (STEREO)
INPUT MONITOR OFF
THRESHOLD -42 dB
OVERWRITE OFF
RECORDING TIME LIMIT NONE
RESTART MODE ON COMPLETION
TIME DISPLAY TIME REMAINING
SORT DIRECTORY BY INDEX
KEYBOARD TYPE MINI
REMOTE CONTROL INACTIVE
CART SPINDOWN ON
SYNC SOURCE INTERNAL
DIGITAL OUTPUT PROFESSIONAL FORMAT
DIGITAL INPUT TYPE AES/EBU XLR-3
AUDIO INPUT TYPE ANALOG
Sample Rate And Format
The sample rate used to record a cut will determine the audio bandwidth of that cut. Select from:
Dolby AC-2, 48000 Stereo, 48000 Mono, 44100 Stereo, 44100 Mono, 32000 Stereo or 32000
Mono. Selecting a sample rate of 48 kHz or 44.1 kHz will yield 20kHz bandwidth. Selecting 32
kHz sample rate will yield greater Drive recording capacity, but will reduce bandwidth to 15 kHz.