360 Systems DigiCart/II Plus - Manual (Page 97)

DigiCart/II Plus Owner's Manual Maintenance Guide • 85
C
HAPTER
S
IX
Maintenance Guide
This Chapter describes the subassemblies of your DigiCart/II Plus and provides information
relating to their use, specifications, and maintenance. Interface schematics are included in
Appendix A.
Because hazardous voltages may be present inside this product, refer service to qualified
electronics service technicians. Qualified technicians may obtain a factory service manual from
360 Systems Technical Support Department.
WARNING
CONNECT ONLY TO A GROUNDED 50/60 HZ AC OUTLET PROVIDING THE
CORRECT VOLTAGE (115 VAC OR 230 VAC, AS DELIVERED).
DO NOT REMOVE OR DEFEAT THE GROUNDING PIN ON THE AC POWER CORD.
A SERIOUS SHOCK HAZARD MAY RESULT FROM FAILING TO MAKE
CONNECTION TO A PROPERLY GROUNDED ELECTRICAL OUTLET.
DO NOT USE THIS PRODUCT OUT OF DOORS, IN RAIN, OR IN DAMP OR WET
ENVIRONMENTS.
THIS PRODUCT CONTAINS A COOLING FAN. DO NOT COVER THE VENTILATION
PORTS WHEN INSTALLING OR USING THE UNIT. FAILURE TO PROVIDE PROPER
VENTILATION MAY CREATE A FIRE HAZARD AND CAN VOID YOUR WARRANTY.
System Maintenance And Repair
The design and construction of DigiCart/II Plus is very different from analog cart machines.
Digital circuitry enjoys a reputation for long term reliability and is largely free of the subtle
degradation that slowly damages audio quality. Your DigiCart/II Plus has no required
adjustments. Maintenance issues relate to keeping it clean, operating at a safe temperature and
correctly connecting external devices.