360 Systems DigiCart/II Plus - Manual (Page 95)

DigiCart/II Plus Owner's Manual File Transfer Network • 83
Receiver Display During Transfer
If the Receiver DigiCart/II Plus is idle and the receiver name matches the
destination name on the source DigiCart/II Plus, when a file transfer begins, the
display shows:
FILE 1 OF 1
00% COMPLETED
This indicates the file number and total number of files and the percent of the
transfer completed for that file.
When the transfer completes without errors, for a few seconds the display shows:
TRANSFER COMPLETE
NO ERRORS
Then the display shows:
GOOD FILES: XX
BAD FILES: XX
This indicates the number of files received without errors and the number of files
discarded due to errors.
Receiver Display After A File Is Received With Errors
If any file is received with errors, after the brief display of the message, the
display will show:
GOOD FILES: XX
BAD FILES: XX
This indicates the number of files received without errors and the number of files
discarded due to errors.
Receiver Display During Error Occurrence
When an error occurs for a received file, the cause of the error is displayed
briefly and the percent complete display changes briefly to:
SKIPPING FILE
When the transfer is complete, the display will briefly show:
TRANSFER INCOMPLETE
ERRORS OCCURRED
Then the display will show: