360 Systems DigiCart/II Plus - Manual (Page 88)

76 • File Transfer Network DigiCart/II Plus Owner's Manual
Assigning A Receiver Name
To assign a receiver name:
1. Press the D-NET XFER button. (It will illuminate when pressed) Rotate
the SELECT control counter-clockwise until the display shows:
RECEIVER NAME
(NONE – RECEIVE ALL)
2. Press the ENTER button. The display will show:
▒
NEW RECEIVER NAME
3. Using the SELECT control and the Left and Right POSITION buttons,
enter the new Receiver name. The name can have from 1 to 15
characters consisting of any combination of letters, digits, dashes and
spaces. Leading and trailing spaces are not significant and are removed
when the name is saved. When you have spelled out the new Receiver
name, press the Right POSITION ARROW button until the cursor is to
the right of the last character in the new destination name. Press the
ENTER button. The display will show:
RECEIVER NAME
(NEW RECEIVER NAME)
To erase a receiver name and allow a DigiCart/II Plus to receive transfers, regardless of
destination name:
1. Press the D-NET XFER button. Rotate the SELECT control
counterclockwise until the display shows:
RECEIVER NAME
(PREVIOUSLY USED RECEIVER
NAME)
2. Press the ENTER button twice. The display will show:
RECEIVER NAME
(NONE – RECEIVE ALL)
Mail Box And Destination Location Transfers
A convenient method for making D-NET transfers is to send to the “Mail Box” on the
receiver machine. For convenience, the Mail Box is always Directory 9. If you transfer
to the Mail Box, it will be stored in the next available index.
There are two significant benefits of transferring to the Mail Box:
The transfer will never overwrite existing cuts in the Mail Box.