360 Systems DigiCart/II Plus - Manual (Page 49)

DigiCart/II Plus Owner's Manual Operating Instructions • 37
1. Press the SETUP MENU button and use the selection controls to choose and
confirm your selection:
CART SPINDOWN
ON
OR
CART SPINDOWN
OFF
NOTE: If spun down, remember to allow a few extra seconds for the Cart to spin up the next time
you want to use it. You can force the cart to spin up in preparation of playback by selecting a cut
or moving to the Directory level and back to the Cut level.
Sync Source
Used to set the digital reference sync signal input source to either INTERNAL or EXTERNAL.
SYNC SOURCE
INTERNAL
OR
SYNC SOURCE
DIGITAL INPUT
Digital Output
The DigiCart/II Plus can output audio on all output connectors simultaneously. Analog output is
always available on the analog connectors. However, the DIGITAL OUTPUT can be disabled or
enabled and can output data in one of three selected formats. The DIGITAL OUTPUT menu
enables or disables the digital outputs and selects the format of the digital audio at the outputs.
By default, recordings made from the analog inputs and the professional AES/EBU or
AES/SMPTE-75 inputs are not copyright protected when output in the consumer format. The
COPY PROTECTED CONSUMER MODE allows non-protected material to be output as a
copyright protected original in the consumer format.
NOTE: The XLR outputs should not be used when the CONSUMER and COPY PROTECTED
CONSUMER settings are selected.
1. Press the SETUP MENU button and use the selection controls to choose and
confirm your selection:
DIGITAL OUTPUT
PROFESSIONAL FORMAT
OR