360 Systems DigiCart/II Plus - Manual (Page 82)

70 • Stack Mode DigiCart/II Plus Owner's Manual
To review the contents of the stack, rotate the SELECT control or press the PLAY
button. The stack will play, beginning with the event selected. Linear Stacks will
play to the end. Rotating Stacks will play only the selected item.
3. Press ENTER to enter the stack Edit Menu. The display will show:
XX.XXXX EVENT NAME
INSERT
Turn select to the Stack Edit function required.
Insert
Adds a cut or stack immediately before the current selection in the Scan Mode.
1. Press the ENTER button.
2. Select INSERT.
3. Press the ENTER button again. The display shows:
X.XXX(L/R) (STACK NAME)
SELECT
4. Use the SELECT and POSITION buttons to find the event you wish to insert.
5. Press the ENTER button to insert the selected event.
6. DigiCart/II Plus returns to the Scan Mode.
6a. Press the ENTER button to continue editing.
or
6b. Press the CANCEL button to exit the stack Edit Menu. The display shows:
X.XXX(L/R) (EVENT NAME)
SAVE CHANGES? Y/N
The number at the upper left shows the new item's position in the stack.
7. Press the ENTER button to save or the CANCEL button to exit. DigiCart/II Plus
returns you to the Stack Directory.
Append
Adds a selection to the end of the current stack.
From the Scan Mode,
1. Press ENTER
2. Select APPEND.
3. Press the ENTER button again. The display shows:
X.XXXX (STACK NAME)
SELECT