Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 107)

91 CHAPTER 7
Troubleshooting
FIG. 7-26 RESUME DISPENSE? DISPLAY
• Press the Start button to resume dispense.
Slow Gate Did Not Open
- - - - - ALARM CONDITION - - - - -
• If the Slow Dispense Gate does NOT
open, the SLOW GATE DID NOT OPEN
alarm appears on the display. (See Fig. 7-
27)
FIG. 7-27 SLOW GATE DID NOT OPEN ALARM
1. Determine why the Slow Dispense
Gate did not open and correct the
problem.
2. Press the Clear button to clear the
alarm. The wait timer display appears.
(See Fig. 7-28)
FIG. 7-28 WAIT DISPLAY
Slow Gate Did Not Close
- - - - - ALARM CONDITION - - - - -
• If the Slow Dispense Gate does NOT
close, the SLOW GATE DID NOT
CLOSE alarm appears on the display. (See
Fig. 7-29)
FIG. 7-29 SLOW GATE DID NOT CLOSE ALARM
1. Determine why the Slow Dispense
Gate did not close and correct the
problem.
2. Press the Clear button to clear the
alarm. The wait timer display appears.
(See Fig. 7-30)
FIG. 7-30 WAIT DISPLAY
Under Dispense/Over Dispense Alarms
- - - - - ALARM CONDITION - - - - -
• If the target weight is NOT within the tar-
get window and you do not have the JOG
function turned ON, the dispense is not
accepted and an UNDERDISPENSE or
OVERDISPENSE alarm appears depend-
ing on the alarm condition. (See Fig. 7-31
& 7-32)
FIG. 7-31 UNDERDISPENSE ALARM