Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 135)

119 CHAPTER 7
Troubleshooting
• The Target Weight is the weight you want
for each fill.
• To change the Target Weight press the Clr
(Clear) button.
• Use the alphanumeric key pad and enter
the new Target Weight.
• Press the Enter button to set the entry.
• Press the down arrow to move to the next
parameter you want to view or change.
Step 36. Press the down arrow button until the next three
menu items are displayed. (See Fig. 7-59)
FIG. 7-59 TEST DATA INGREDIENT DISPLAY/TAR-
GET PREACT - SMART PREACT - TARGET WIN-
DOW (WT+)
Step 37. Target Preact, Smart Preact and Target Window
Weight (+) are read only.
• The Target Preact is the value below which
a target gate will close.
• Smart Preact is a self adjusting or auto-
matic preact and the user can turn this
function ON or OFF.
• The Target Window (Wt) + is the Target
Window tolerance above the Target Win-
dow expressed in Weight.
Step 38. Press the down arrow button until the next three
menu items are displayed. (See Fig. 7-60)
FIG. 7-60 TEST DATA INGREDIENT DISPLAY/TAR-
GET WINDOW (WT-) - TARGET WINDOW (WT%+)
-TARGET WINDOW (WT%-)
Step 39. Target Window Weight (-) - Target Window Weight
(%+) - Target Window Weight (%-) are read only.
• The Target Window (Wt) - is the Target
Window tolerance below the Target Win-
dow expressed in Weight.
• The Target Window (Wt%+) is the Target
Window tolerance above the Target Win-
dow expressed in Percentage.
• The Target Window (Wt-) is the Target
Window tolerance below the Target Win-
dow expressed in Percentage.
Step 40. Press the down arrow button until the next three
menu items are displayed. (See Fig. 7-61)
FIG. 7-61 TEST DATA INGREDIENT DISPLAY/JOG
ON TIME - JOG COUNT - JOG OFF TIME
Step 41. Jog On time - Jog Count - Jog Off Time are read
only.
• Jog on Time - This is the amount of time
the feeder will operate in seconds.
• The Jog Count - This is the number of jogs
allowed before an alarm is set.
• Jog Off Time - This is the amount of time
after a Jog before the net weight is
checked.
Step 42. Press the down arrow button until the next three
menu items are displayed. (See Fig. 7-62)
FIG. 7-62 TEST DATA INGREDIENT DISPLAY/FILL
TIMER - WAIT TIMER - SPEED
Step 43. Fill Timer - Wait Timer - Speed are read only.
• Fill Timer - The time in seconds it takes to
complete a fill before an alarm is set.
• Wait Timer - The time in seconds after a
fill the instrument waits before net weight
is read.