Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 136)

HI-3010 Filler/Dispenser/IBC 120
Service Manual
• Speed - The speed selected for this Ingre-
dient either Single or dual.
Step 44. Press the down arrow button until the next three
menu items are displayed. (See Fig. 7-63)
FIG. 7-63 TEST DATA INGREDIENT DISPLAY/FAST
FILL PROOF SWITCH - FAST FILL PROOF TIMER -
FAST FILL WEIGHT
Step 45. Fast Fill Proof Switch - Fast Fill Proof Time - Fast
Fill Weight are read only.
• Fast Fill Proof Switch - Proof switch for
the fill feeder is either ON or OFF.
• Fast Fill Proof Timer - If the Fast Fill
Proof Switch is ON, the set time it takes
for the switch to safely open or close.
• Fast Fill Weight - If Dual Speed is selected
the weight set point in which the fast gate
closes.
Step 46. Press the down arrow button until the next three
menu items are displayed. (See Fig. 7-64)
FIG. 7-64 TEST DATA INGREDIENT DISPLAY/
AUTO FAST ADJUST - MODE - SLOW FILL PROOF
SWITCH
Step 47. Auto Fast Adjust - Mode - Slow Fill Proof Switch
are read only.
• Auto Fast Adjust - If Dual Speed is
selected it adjusts the Fast Weight value.
this value is the preact weight from the tar-
get weight where the fast feed shuts off.
Preact is the pre-activation point where the
valve closes to account for in flight mate-
rial and valve de-activation timing.
• Mode - If Dual Speed is selected it and
Auto Fast Adjust is ON shows which fill
mode has been selected, Simultaneous or
Sequential.
• Slow Fill Proof Switch - If Dual Speed is
selected and Auto Fast is ON this menu
item indicates if the Slow Fill Feeder
Switch is On or Off.
Step 48. Press the down arrow button until the next three
menu items are displayed. (See Fig. 7-65)
FIG. 7-65 TEST DATA DISPLAY/SLOW FILL PROOF
TIMER - PRT BAUD RATE - PORT PARITY
NOTE: Slow Fill Proof Timer is the last item in the Test
Data Ingredient Menus.
Step 49. Slow Fill Proof Timer - Printer Baud Rate -Printer
Parity are read only.
• Slow Fill Proof Timer - If the Slow Fill
Proof Switch is ON, the set time it takes
for the switch to safely open or close.
• Printer Baud Rate - Indicates the Baud
Rate for the printer.
• Printer Parity - Indicates the parity setting
for the printer (Odd, Even, None).
Step 50. Press the down arrow button until the next three
menu items are displayed. (See Fig. 7-66)
FIG. 7-66 TEST DATA DISPLAY/PRINTER DATA
BITS - NUMBER OF LOAD SENSORS - LOAD SEN-
SOR
Step 51. Printer Data Bits - Number of Sensors -Load Sensor
are read only however you can select a load sensor
to view.
• Printer Data Bits - Indicates the Data Bit
setting for the printer.