Print screen default, Directional buttons, List selection/enter button – Hardy HI 3010 Filler/Dispenser Controller User Manual

Page 38

Advertising
background image

HI-3010 Filler/Dispenser/IBC

22

Service Manual

Print Button

The Print Button when pressed brings up a series of screens
(See Fig. 4-2) and allows the user to Print the following:

Current Fill/Dispense

Current Cycle

Totals

Setup Data

Press the Print button, the following screen appears:

FIG. 4-2 PRINT SCREEN DEFAULT

Note that the cursor is in front of the Print Current Fill Menu.
that is the default setting. The print button will only print the
menu with a cursor in front of it. To move to another menu
press the up or down arrow until the cursor is in front of the
menu you want to print.

Up/Down - Left/Right Buttons

FIG. 4-3 DIRECTIONAL BUTTONS

The Up/down arrow buttons move the cursor vertically
allowing the user to scroll through each item of a menu. The
Left/Right arrow buttons move the cursor horizontally left
and right. The Left arrow button has an added backspace
function. For example, if there are AlphaNumeric characters
that appear in the display, as you press the left arrow button
it erases the characters. The Right arrow button moves the
cursor to the right in the display and does not erase a alpha-
numeric entry. The Left/Right arrow buttons also move the
cursor through a pick list. (See Fig. 4-3)

Enter Button

The Enter Button enters the alphanumeric value entered for a
menu item in the display. The Enter Button also enters the
selections from a pick list. (See Fig. 4-4)

FIG. 4-4 LIST SELECTION/ENTER BUTTON

For example, when selecting units from a pick list, use the
left and right arrows to move the cursor in front of the unit
you want and press the Enter button.

Exit Button

The Exit Button disregards the current value entry, restores
the previous value and moves the cursor to the last menu.

Clear Button

The Clear Button clears the total alphanumeric entry and
repositions the cursor for the first entry.

Ing./1 Button

Enables you to change the preprogrammed ingredient (1-12)
while in the Standby Mode. Also enters the integer 1 in the
display.

2/ABC Button

Enters the integer 2 in the display. Also enters the letters A,
B,C, in uppercase and a,b,c in lower case then the number 2.

NOTE:

Pushing the button once enters an uppercase A.
Pushing the button a second time enters an
uppercase B, third time a C. Push the button a
fourth time and a lowercase “a” is entered. Push
the button a fifth time and a lowercase “b” is
entered. When the button is pushed a seventh time
the number “2” is entered. You need to push the
buttons rapidly. If you delay too long the instru-
ment accepts the alphanumeric character and
moves the cursor to the left preparing for the left
entry. If this happens, use the left arrow button to
erase the current entry and enter another charac-
ter. This is true for all the alphanumeric buttons.

PRINT KEY MENU
Pr int cur r ent Disp
Pr int Cur r ent Cycl e
Pr int Tot al s

>

Advertising