Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 96)

HI-3010 Filler/Dispenser/IBC 80
Service Manual
Ingredients 1-12 are duplicates and are addressed and for-
matted as follows:
• ppss:
Where pp is the prefix for the ingredient
number. (HEX)
Where ss is the suffix ingredient param-
eter. (HEX)
Prefix:
Ingredient Number 1 03ss
Ingredient Number 2 07ss
Ingredient Number 3 0Bss
Ingredient Number 4 0Fss
Ingredient Number 5 03ss
Ingredient Number 6 17ss
Ingredient Number 7 1Bss
Ingredient Number 8 1Fss
Ingredient Number 9 23ss
Ingredient Number 10 27ss
Ingredient Number 11 2Bss
Ingredient Number 12 2Fss
Mapping From the Front Panel
Mapping assigns controllable Inputs and Outputs to any
point on a Local Controller. Mapping can be done from the
Front Panel or the Browser.
0201 Span Weight 0.000001-999999
(Read Only)
0204 Cal Type 0 = C2
1 = Traditional
Hard Calibration
(Read Only)
0280 Serial Number 14 (Read Only)
0281 Model Number HI 3010
(Read Only)
0282 Program Part Num-
ber 0650-0xxx-01
(Read Only)
0283 Firmware Revision 1.X.XX
(Read Only)
02F0 NO Assignment
Statements Defined HFO0=+HF12,
DFO0=+HF13,
HO0.0=+HI2.1
(Read Only)
Suffix Code Explanation Valid Range
pp01 Ingredient Name ONE (19 Charac-
ters)
TABLE 6-3: INGREDIENTS 1-12
Parameter
Number
(Hexadecimal)
Code Explanation Valid Range
TABLE 6-2: PARAMETER NUMBER, CODE
EXPLANATION AND VALID RANGES
pp02 Total .0000001-999999
pp03 Cycles 0-9999
(Current Count
Read Only)
pp04 Fills 0-9999
(Fill Cycles Menu)
pp05 Speed 0 = Single
1 = Dual
pp06 Target Weight 0.000001-999999
pp07 Preact 0.0000001-999999
pp08 Auto Preact 1 = YES
0 = NO
pp09 Target Min/Max 0 = Weight
1 = Percentage
pp0A Max. Weight 0.000000-999999
pp0B Min. Weight 0.000000-999999
pp0C Max.% 0.00000-99.9
pp0D Min.% 0.00000-99.9
pp0E Jog ON time 0.00000-99.9
pp0F Jog Count 0-9
pp10 Jog Off Time 0.1-99.9
pp11 Fill time 0-999
pp12 Wait Timer 0.00000-999.9
pp13 Mode 0 = Sequential
1 = Simultaneous
pp14 Fast Target Weight 0.000001-
999999.00
pp15 Auto Fast 1 = YES
0 = NO
pp16 Fast Gate Time 0-99
pp17 Fast Limit Switch 1 = YES
0 = NO
pp18 Slow Limit Switch 1 = YES
0 = NO
pp19 Slow Gate Time 0-99
Suffix Code Explanation Valid Range
TABLE 6-3: INGREDIENTS 1-12