SINGER 8234 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

THREADING THE BOBBIN CASE

1. Hold bobbin so that thread unwinds in the

direction shown, and put bobbin into bobbin
case.

2. Pull thread into notch A, draw it back under

the tension spring and back into slot B.

3. Draw approximately 10 cm (4 inches) of

thread across the bobbin.

4. Close slide plate allowing thread to enter

slot between the needle plate and slide
plate.

19

Advertising
This manual is related to the following products: