SINGER 8234 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RAISING THE BOBBIN THREAD
Now that you have wound the bobbin and
threaded the needle, raise the bobbin thread
through the hole in the needle plate.
1. Hold needle thread lightly with left hand
and turn hand wheel slowly toward you so
that needle enters needle plate.
2. Continue turning hand wheel and holding
needle thread until needle rises and brings
up bobbin thread in a loop.
3. Undo the loop with your fingers.
Place both needle and bobbin threads
under the foot and draw them to back on