Procedure – SINGER 8234 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The twin-needle simultaneously produces two
parallel, closely spaced lines of pattern stitch
ing. You can stitch with either one or two col
ours of thread.
•
® Pattern Group Selector: Stitch desired
®
Needle Position:
• Stitch Width:
• ^ |
® Stitch Length: . 5 - 4 to suit fabric
® General Purpose Needle Plate
• General Purpose Foot or Special Purpose Foot
X;
A
only
: $ onlyA
Procedure
® Insert twin-needle.
® Thread as for single-needle stitching, and
through right eye of needle.
® Attach detachable spool pin, with felt.
® Place spool of thread on detachable spool
pin and thread machine in usual way.
@ Thread through remaining points, making cer
tain to omit the thread guide above the needle
and pass thread through left eye of needle.
A
CAUTION; Do not use a stitch width greater than what is recommended. A wider stitch will result in needle breakage.
67