Vitek VT-4097 SR - Manual (Page 5)

ENGLISH
6. AVIN
To select an external audio and video input to use for recording.
7. Channel down/up(+,-)
To select the preset TV channels.
8. Display
Toviewthe Title, Chapter, Track information or Subtitle Language,
Audio Language.
9. DVD
To switch to DVD mode.
10. DV/USB
To select a digital A/V input from a DV camcorder or USB flash
memory. (USB Flash Drive).
11. Edit
To edit a title or chapter of disc.
12. Enter
To select the menu item.
13. File
Toviewthefile list. (MPEG-4, MP3, JPEGfiles)
14. HDD/DUB
To switch to HDD mode. To copythe titlesfrom HDDto disc.
15. Menu
To display the contents menu of the loaded DVD disc.
16. Mute
To turn on/off audio outputs.
17. Next
To skip to the next chapter or track.
18. Numeric (0-9)
Use the number buttons for track/chapter/title selection.
19. Open/Close
To open or close the disc tray.
If pressed under STANDBY power is automaticallyturned on.
20. Pause
When you pressthis button during playback, you can viewthe still
picture.
21. Play
To playthe loaded disc or HDD.
22. Prev
To skip to the previous chapter or track.
23. Program
To playback in a specific order.
This button works only when the CD is played back.
24. REC (Record)
To start recording.
25. Repeat
To select a repeat mode.
26. Return
To move to a previous menu.
When using VCD 2.0 and SVCD with PBC function, this button works
as a RETURN button.
27. SCAN FWD
To start forward scanning during playback.
28. SCAN REV
To start reverse scanning during playback.
29. SETUP
To change the initial settings.
30. SLOW
To playthe disc contents in slowforward.
31.SORT/PIP
To sortthe titles of HDD in the order of the title name or date.
Toviewthe external video while the DVD or HDD is played back.
32. STANDBY/ON
Activates the unit POWER ON or into STANDBY
33. STOP
To stop a disc or HDD playing.
34. SUBTITLE
To select the subtitle language.
35. TIMER REC
To set a timer recording.
36. TIMESHIFT
To store a TV program in the HDD storage cache temporarily.
37. TITLE
To display the title menu of the DVD.
38. TV
To switch to the TV mode.
39. TV/DVD
To view channels selected by the recorder tuner or by the TV tuner.
It works only when recorder and TV are connected by European
Scarf cable while SCART out setting is RGB in Setup Menu.
40. TV MODE
Set up TV type according to type supported by user’s TV.
Each time you press this button repeatedly, the TV type will change
among NTSC, PALand progressive scan/HDMI. This button works
only when the disc tray is open.
41. ZOOM
Enlarges DVD or HDD screen image upto 2times.
Connection forVideo Output Terminals
Composite Video (CVBS) Output
The composite video output is supported by most televisions.
The composite video jack on TV is usually yellow and may be labeled
video, CVBS, composite.
EuroA/V Output
The Euro AV terminal can be connected to the TV equipped with Euro AV
connector. The audio transmitted on the Euro AV is stereo sound.
S-Video Output
The S-Video output can be connected to the TV equipped with an S­
Video input.
The S-Video jack on TV may be labeled S-Video, Y/C, S-VHS.
The S-Video provides better picture than the composite video.
Component Video Output
The component video output can be connected to the TV equipped with
component input. The component video jacks on TV may be labeled YUV,
4097IMnew.indd 5 27.02.2007 13:34:48