AMETEK XG Family Programmable DC - Manual (Page 160)

Remote Operation
5-28 M370430-01 Rev E
Multichannel commands are particularly useful for configuring groups
of devices that require identical configurations.
The SCPI Commands for these instructions are:
[:]<root command> <ALL|addr1>[,[ ]<addr2>][,[
]<addr3>][,...]:<command> <parameter>
For example:
sour1, 2, 3, 7:volt 4.5
syst4,5,6:oper:enab 255
sourALL:volt 5
output0:stat on
Note: ALL and 0 do not work for querry commands (ie.
SOURALL:VOLT?, MEAS:VOLT?, SOUR:CURR?, MEAS:CURR?)