Scpi command summary – AMETEK XG Family Programmable DC User Manual
Page 306
A
-1
4
M
3
7
0
4
3
0
-0
1
R
e
v
E
A
P
P
E
N
D
IX
A
S
C
P
I C
o
m
m
a
n
d
R
e
fe
re
n
c
e
SCPI Command Summary
The SCPI commands supported by this programmable power supply are described in the tables in the
remainder of this section. These tables use the following column headings:
•
Function The commonly used name for the function.
•
SCPI Command The full command in long form.
•
Description Explains what the command does or what is affected by it.
•
Query? Indicates whether the unit supports a query version of the listed command.
•
N/A Indicates Not applicable. (The command has no query form and will respond with an error if
queried.)
Table A-1
IEEE 488.2 Commands
Function
SCPI Command
Description
Parameter and
Range
Query
Select Address
*ADR
Select the power supply unit
to communicate with.
?|<Address (1–30)>
Yes
Clear Status
*CLS [:]STATus[<channel>]:CLEar
Clears all the status data
structures.
N/A
Query the Error
Queue
*ERR
Query the Error Queue for the
oldest error event.
Standard Event
Status Enable
Query
*ESE?
[:]STATus[<channel>]:STANdard:ENABle
Query the Standard Event
Status Enable register
settings.
Yes
Standard Event
Status Enable
*ESE
[:]STATus[<channel>]:STANdard:ENABle
<ESE-word>
Set the Standard Event Status
Enable Register bits.
<Enable Flags(0–
255)>
N/A
Standard Event
Status Register
Query
*ESR?
[:]STATus[<channel>]:STANDard[:EVENt]?
Query the Standard Event
Status Register (SERS).
Yes