ARRIS TG1672G-NA Web GUI User Guide - Manual (Page 26)

Touchstone 16xx Gateway Router Setup – Web GUI User’s Guide
Page 26 of 96 November 2013
5. Enter the following parameters in the dialog box.
Description – Enter a name for the port trigger.
Outbound Port – Enter the outbound port range for the port trigger. It should be the same
range as the inbound port.
Format – Sets the format for the port. Options are TCP, UDP, or BOTH.
Inbound Port – Enter the inbound port range for the port trigger. It should be the same
range as the outbound port.
6. Click the Add Port Trigger button to add the port trigger.
Note: To delete a port trigger, first select a port trigger in the list and then click the
Delete button.
3.12 Firewall – Configuring Client IP Filters
The router can be configured to restrict access to the Internet, email, or other network services
at specific days and times.
Perform the following steps to add a client IP filter.
1. Access and log into the configuration interface.
2. Click the Firewall tab.
3. Click Client IP Filters in the side menu to display the Client IP Filter Configuration screen.
4. Check the Add button to display the Add Client IP Filter dialog box.