ARRIS TG1672G-NA Web GUI User Guide - Manual (Page 43)

Section 2: Web GUI Screens and Configuration Parameter Reference
November 2013 Page 43 of 96
6.3 WAN SETUP – Dynamic Configuration Settings (IPV6)
This screen enables a DHCPv6 configured IPV6 stack. A dynamic connection type is the most
common.
The router gets its IP address from a DHCP server at the cable company. If you are not sure of
your connection type, use this type. For changes to take effect, you must click the Apply button.
Dynamic Configuration (IPV6):
Enable DHCP (IPV6) – Click this checkbox to enable a DHCP (IPV6) connection for your system.
IP Address V6 – This field displays the IPV6 address automatically assigned by the MSO. An IPV6
address has eight groups of four hexadecimal digits (0-9, a-f). The groups are separated by
colons (:) e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334. A double colon (::) is shorthand for
an address of all zeros.
Delegated Prefix – This field displays the assigned IPV6 prefix to be used by addresses allocated
in the local network.
Delegated Prefix Length – This field displays the assigned IPV6 prefix length.
IPV6 Gateway Address – This field displays the gateway address.