ARRIS TG1672G-NA Web GUI User Guide - Manual (Page 40)

Touchstone 16xx Gateway Router Setup – Web GUI User’s Guide
Page 40 of 96 November 2013
6 WAN Setup
6.1 WAN SETUP – Dynamic Configuration Settings
A dynamic connection type is the most common. The router gets its IP address from a DHCP
server at the cable company. If you are not sure of your connection type, use this type. For
changes to take effect, you must click the Apply button.
Dynamic Configuration:
Enable DHCP – Click this checkbox to enable a DHCP connection for your system.
IP Address – This field displays the IP address.
Subnet Mask – This field displays the subnet mask.
Gateway Address – This field displays the gateway address.