ARRIS TG1672G-NA Web GUI User Guide - Manual (Page 70)

Touchstone 16xx Gateway Router Setup – Web GUI User’s Guide
Page 70 of 96 November 2013
8.7 Wireless 5 GHz – MAC Address Control
MAC Address Control allows you to restrict access to your network to only those client devices
whose MAC addresses you add to the filter list. You can make changes to the Media Access
Control (MAC) Address Filtering List on this page. For changes to take effect, you must click the
Apply button.
Wireless: (Technician Level only)
SSID – Sets the SSID for each individual LAN on your network.
Note: You can optionally set up the system so that there is more than one LAN in your
network. This is most useful for commercial applications not home use. All of the “LAN
Setup” and “Wireless Setup” configuration parameters can be set independently for each
individual LAN.
MAC Address Filtering:
MAC Address Filter Type – Sets the MAC address filter type. None – Allows any device to try to
connect. Allowed List – Allows any listed device to connect. Blocked List – Allows any device
not listed to connect. Note that the correct access keys must still be entered if required.