ARRIS TG1672G-NA Web GUI User Guide - Manual (Page 8)

Touchstone 16xx Gateway Router Setup – Web GUI User’s Guide
Page 8 of 96 November 2013
1 Introduction
This section explains how to set up your router and configure your wireless connection,
including:

Basic Configuration

Advanced Configuration
1.1 Pre-Configuration Requirements
IMPORTANT: In order to configure your router, you should have already
done the following:

Installed the router hardware as described in Installing and Connecting your ( Product
Name) in the User’s Guide for your specific product.

Established a wired Ethernet connection between your computer and your ARRIS
router, as follows:
-
Connect an Ethernet cable to your computer and to an available Ethernet port on
the back of your router.
-
Configure the Ethernet connection as explained in Configuring Your Ethernet
Connection in the User’s Guide for your specific product.
1.1.1 User Guides
If you do not have the User Guide for your product, you can download one here:
http://www.arrisi.com/support/guides/