ARRIS TG1672G-NA Web GUI User Guide - Manual (Page 41)

Section 2: Web GUI Screens and Configuration Parameter Reference
November 2013 Page 41 of 96
6.2 WAN SETUP – Static IP Connection Type
A static IP address connection type is less common than others and uses a permanent IP address
to connect to the Internet. If your Internet Service Provider gives you an IP address that never
changes, then use this option. For changes to take effect, you must click the Apply button.
Static IP Settings:
Enable Static IP - Click this checkbox to enable a static IP address connection for your system.
IP Address – Enter the IP address assigned by your ISP or static IP operation.
Subnet Mask – Enter the subnet mask assigned for your device by your ISP or static IP operation.
Gateway Address – Enter the gateway address assigned for your device by your ISP or static IP
operation.
Primary DNS Server IP – Enter the IP address of the primary DNS server. Your ISP will provide
this information.
Secondary DNS Server IP - Enter the IP address of the secondary DNS server. Your ISP will
provide this information.
Tertiary DNS Server IP - Enter the IP address of the tertiary DNS server. Your ISP will provide this
information.