4 wan setup – static ip connection type (ipv6), Wan setup – static ip connection type (ipv6) – ARRIS TG1672G-NA Web GUI User Guide User Manual

Page 44

Advertising
background image

Touchstone 16xx Gateway Router Setup – Web GUI User’s Guide

Page 44 of 96 November 2013

6.4 WAN SETUP – Static IP Connection Type (IPV6)


This screen enables a statically configured IPV6 stack. A static IP address connection type is less

common than others and uses a permanent IP address to connect to the Internet. If your

Internet Service Provider gives you an IP address that never changes, then use this option. For

changes to take effect, you must click the Apply button.

Static IP Settings (IPV6):

Enable Static IPV6 - Click this checkbox to enable a static IPV6 address connection for your

system.

IP Address V6– Enter the IPV6 address assigned by your ISP or static IP operation. An IPV6

address has eight groups of four hexadecimal digits (0-9, a-f). The groups are separated by

colons (:) e.g. 2001:0db8:85a3:0000:0000:8a2e:0370:7334. A double colon (::) is shorthand for

an address of all zeros.

Prefix Length (IPV6) – The length of the network portion of this address.

IPV6 Gateway Address – Enter the gateway address assigned for your device by your ISP or static

IP operation.

Advertising
This manual is related to the following products: