Digi MIL-3000FTX - Manual (Page 100)

MIL-3000FTX Series of FastPort Print Servers 10-1
C h a p t e r 1 0
FastPort Application
Chapter 10 gives an description of the FastPort Application. The FastPort
Application is used to manage SNMP devices.
10.1 FastPort Application
FastManage supports most SNMP devices, including the MIL-3000FTX.
The software detects devices during Discovery (see Chapter 10). The
FastPort PrintServer MGR . icon allows users to open a specific
FastPort. To do so:
1. From the “FastManage for FastPort” Windows menu, double-click onto
the FastPort PrintServer Mgr. (Figure 10-1) icon.
2. When prompted for an “IP Address/Alias,” “IPX Address/Name,” or a
“NetBIOS Name,” enter the device’s name or address and click Ok.
Enter in the name or address exactly as it appears in the network.
3. A graphic displaying the device’s front and rear panel appears (Figure
10-2). This graphic is the same as displayed during Discovery.
Figure 10-1. FastPort PrintServer Mgr. Icon