Digi MIL-3000FTX - Manual (Page 89)

MIL-3000FTX Series of FastPort Print Servers 9-2
9.2 Launching Discovery
Figure 9-1. FastManage for FastPort menu
1. Double-click on the Discovery Application icon. The software
“discovers” all of the SNMP devices on the subnet.
2. Devices will now appear on Map 1 as “thumbnails,” which represents
each SNMP device (Figure 9-2).
3. Double-click on a thumbnail to display a full-screen image of that
particular SNMP device (refer to Chapter 10).
Figure 9-2. Map 1 Discovery Application
Note: Discover uses three protocols to find SNMP devices: IP, IPX, and NetBIOS. This
means that if a device uses all three of these protocols, that device will be “discovered”
three different times on the Map.