Digi MIL-3000FTX - Manual (Page 154)

MIL-3000FTX Series of FastPort Print Servers I-2
If technical support determines that the unit is defective, a return
materials authorization (RMA) is issued by our RMA admin. who
provides shipping instructions.
Note: It is required that any return has an RMA number or it will be rejected and returned to
the sender.
I.5 How to access Digi’s FTP Sites
Digi has set up an FTP server. To ensure binary transfer of files, switch to
binary mode by entering bin or binary before downloading. To access the
ftp client:
• FTP to 206.40.59.2 or ftp.milan.com
• Login as “anonymous”
To access the FTP sites from a web browser:
• FTP to 206.40.59.2. This is also called muffly or ftp://
ftp.milan.com .
Drivers and installation tips are located in:
/pub/fastport/software and /pub/fastport/faq
I.6 UNIX Binary Files Available
The following UNIX binaries are available on the FTP site:
• /pub/fastport/software/unix/
Always check the FTP site for previous and latest compiles. These files
contain the host software (fpfilter) and other printing utilities. The file
“disk61X.tar,”contains the latest install script and fpfilter binaries.
File Name Description
/aix
rs6k_325.tar RS6000 AIX 3.25
rs6k_414.tar RS6000 AIX 4.1.4
rs6k_415.tar RS6000 AIX 4.1.5
rs6k421_fpf332.tar RS6000 AIX 4.2.1
/amdahl
amd_uts.tar Amdahl UTS
amd_uts_fpf332.tar Amdahl UTS 2.1.5 SysV rel 3.1
/bsd
multsun4.tar fpmulti for piping on SUN OS 4.X