Digi MIL-3000FTX - Manual (Page 15)

MIL-3000FTX Series of FastPort Print Servers 1-6
9. Verify normal boot-up. The unit performs POST (power-on self-test) at
start-up and tries to resolve its IP addresses:
– If the IP address is set, the SYS LED blinks once per second.
– If the IP address is not set, the SYS LED blinks five times per second
until the address is set either manually or by using RARP , BOOTP , or
DHCP .
FastPort should now be functioning on the network