Digi MIL-3000FTX - Manual (Page 86)

MIL-3000FTX Series of FastPort Print Servers 8-7
• Enable IPX : When selected, FastManage enables IPX protocol. If not
selected, FastManage will not perform any SNMP over IPX operation.
Not checked by default.
• Do IPX Routing : When enabled, users can manage IPX devices across
the router. If the device name is specified in the host file, then that
device will be discovered (
Enable IPX , Do IPX routing , and the
Poll “hosts” file all have to be enabled). The “Enable IPX”
parameter must be selected to enable this option. Checked by default.
• Do IPX Discovery : Use SNMP over IPX and find all devices that
respond. The “Enable IPX” parameter must be selected to enable this
option. Not checked by default.
• Enable NetBIOS : When this option is chosen, this enables NetBIOS
using the NetBeui protocol. If not selected, this will not perform any
SNMP over NetBIOS operation.
• Strict Name Resolution : When this is enabled, all device names
starting with SNMPA will be treated as NetBIOS names. The “Enable
NetBIOS” parameter must be selected to enable this option. Checked by
default.
• Do NetBIOS Discovery : Uses SNMP over NetBIOS and finds all
devices that respond. The “Enable NetBIOS” parameter must be
selected to enable this option.
• Default : Initialize all the parameters to default values.
• Save Options : Saves all changes to the issnmp.ini file.
• Cancel : Cancels the changes.
8.2.2.3SNMP Agent Parameters
Figure 8-5. SNMP Agent Parameters