Digi MIL-3000FTX - Manual (Page 44)

MIL-3000FTX Series of FastPort Print Servers 4-7
Figure 4-9. Print Server
The printer is now connected to FastPort. Continue to the next section to
assign a print queue to the print server.
4.3.2.5Assigning a Print Queue to FastPort
1. Double-click the recently assigned printer (Figure 4-3).
Figure 4-10. Context Tree
2. In the next window, click Assignments .
3. In the “Assignments” menu, click Add .
4. When the Select Object menu appears, select the print queue created
and click OK .
5. Click OK (if this is correct).
The print queue to a printer is now assigned. Now use ACT to set up a DS
Tree Name and DS Context Name .