Digi MIL-3000FTX - Manual (Page 99)

MIL-3000FTX Series of FastPort Print Servers 9-12
9.5.3 Application Launch Parameters
The “Application Launch Parameter” allows users to name and then
launch any other SNMP device. To configure the Edit Launch Parameters:
1. Select Application Launch Parameters .
2. The “Edit Launch Parameters” menu appears.
3. In the Object Indentifier of the Device line, enter the SNMP
device’s unique SNMP identifier.
4. In the Launch App and Cmd Line Paras line, enter the name of the
application to be launched. For Digi devices, add an %s at the end.
5. Click Add when you are finished.
User’s are now able to launch that SNMP device.
9.5.4 Mib2 System Parameters
The Mib2 system parameter allows users to identify a workstation.
Note: If the FastPort print servers has a telnet password enabled, users cannot manage the
device with the FastManage software.
1. From “Parameters,” select Mib2 System Parameters . The “Mib2
System Parameters” menu appears.
2. Fill in the required parameters:
• Get Community : This parameter is required to be set. Default: public.
• Set Community : This parameter is required to be set. Default: private.
• Description : This information will be returned by the FastManage
software in response to an SNMP query. Default is the FastManage’s
SNMP agent.
• Name : This information will also be returned by the FastManage
software in response to an SNMP query. Field is blank by default.
• Location : This information will also be returned by the FastManage
software in response to an SNMP query. Field is blank by default.
• Contact : This information will also be returned by the FastManage
software in response to an SNMP query. Field is blank by default.
• Enable Agent : Checked by default.
• Save : Saves all changes to the issnmp.ini file.
• Cancel : Cancels the changes.