Digi MIL-3000FTX - Manual (Page 148)

MIL-3000FTX Series of FastPort Print Servers G-6
• Modify?, yes or no (y or n)?:n
G.8.1.4.2TCP/IP Menu Options: (L) LPD Options
LPD options:
• LPD enabled
• Output Control-D at end of job on Postscript queues
• Output FF at end of job on ASCII queues
• Print banner page (after job)
• User defined queues: None
• Modify?, yes or no (y or n)?:n
• TCP/IP menu options
• (X) Exit
G.9 P—Display/Set Parallel Port Parms and Status
G.9.1 Display/Set for MIL-3200FTX
Select port
1.(Parallel 1)
2.(Parallel 2)
<enter> (don't change/continue)
Parallel port 1 status: ON LINE, PAPER ERROR
Current Parallel port 1 config:
mode setup/strobe (us) console/test page
Standard 2.7 PostScript
Parallel port mode:
1.(Standard)
2.(Fifo-ACK)
3.(Fifo-BUSY
<enter> (don't change/continue)
Select data-setup/strobe-width (in msec.):
4.(2.7)
5.(5.4)
6.(8.1)
7.(10.8)