Digi MIL-3000FTX - Manual (Page 62)

MIL-3000FTX Series of FastPort Print Servers 5-16
5.6 Installing and Printing from Data General's DG/UX
FastPort supports DG/UX™ 5.4 Release 2.01 and above. Current versions
of DG/UX fully support FastPort; meaning that an interface script or filter
command do not need to be loaded. These files are:
• /usr/lib/lp/bin/fpfilter
• /usr/lib/lp/model/fastport
5.6.1 Assigning Host Name and IP Address
Use the sysadm to add FastPort’s IP/Ethernet address, via:
Networking -> TCP/IP -> hosts -> Add
1. Add FastPort to the local hosts database ( /etc/hosts ) or the Network
Information Services (NIS).
e.g., Host name: fastport2-pr
2. Add the Internet address that the system admin. assigned.
e.g., Internet Address: 128.222.55.55
3. Add an alias (optional). Or press [Enter] to continue.
e.g., Alias List: <press Enter>
4. Confirm the choices.
OK to perform operation? [yes]. Press [Enter].
fastport2-pr has been added
5. Add an Ethernet address by modifying the local ethers database ( /
etc/ethers ) or the NIS ethers database. Follow the ensuing path:
Networking -> TCP/IP -> Ethers -> Add
6. Enter the name of the host that was specified in Step 1.
Host Name: fastport2-pr
7. Enter the FastPort’s Ethernet address:
Ethernet Address: 00:40:c8:55:55:55
8. Confirm the choices.
OK to perform operation? [yes]. Press [Enter].
fastport2-pr has been added.