Applevel1 - g.6 i—display/set ip address, Applevel1 - g.8 n—network protocols menu, Applevel2 - g.8.1 network protocols menu – Digi MIL-3000FTX User Manual
Page 145: Applevel3 - g.8.1.1 a—appletalk options
MIL-3000FTX Series of FastPort Print Servers
G-3
3.(Display flash chip information)
<enter> (don't change/continue)
G.6 I—Display/set IP Address
current IP address: 0.0.0.0
Modify?, yes or no (y or n)?:y
Enter new IP address: 199.86.12.165
new IP address: 199.86.12.165
G.7 L—Limit monitor Network Access by Password
•
Network monitor password security currently Off
•
Monitor Security
1.(Off)
2.(On/New Password)
<enter> (don't change/continue)
G.8 N—Network Protocols Menu
G.8.1 Network Protocols Menu:
•
A—AppleTalk options
•
H—HP DLC options
•
M—Microsoft Windows print services options
•
N—NetWare options
•
S—SNMP options
•
T—TCP/IP (sockets, LPD, RARP, BOOTP, TFTP) options
•
X—Return to Main Menu
G.8.1.1A—AppleTalk Options
•
AppleTalk enabled
•
AppleTalk Phase 2
•
Default zone name: *
•
Parallel port 1:
•
Printer name: FP000B0B-par1
•
Printer always in Chooser