Digi MIL-3000FTX - Manual (Page 98)

MIL-3000FTX Series of FastPort Print Servers 9-11
• Times : If this is enabled and a time is set, this option sets the number of
times FastManage “broadcasts” before giving up finding a node.
“Enable IP” must be selected to enable this option. Checked and
3
times are the default.
• Poll “hosts” List : If this is checked, FastManage reads through a
Map list, if a name is in the hosts file, it will then use SNMP to discover
a host. Checked by default.
• Poll Map List : If selected, this option “discovers” each host in a Map
through SNMP. Checked by default.
• Find Only Digi Devices : If checked, this option finds and displays
only Digi devices. Not checked by default.
• Enable IPX : If this option is selected, FastManage enables IPX
protocol. If not selected, FastManage will not perform any SNMP over
IPX operation. This protocol is checked if IP was selected during setup.
• Do IPX Routing : If this is enabled, user’s can manage IPX devices
across the router. If the device name is specified in the host file, then
that device will be discovered (the
Enable IPX , Do IPX routing ,
and the Poll “hosts” list all have to be enabled).
The “Enable IPX” parameter must be selected to enable this option.
Checked by default.
• Do IPX Discovery : Use SNMP over IPX and find all devices that
respond. The “Enable IPX” parameter must be selected to enable this
option. Not checked by default.
• Enable NetBIOS : When selected, this option enables NetBIOS using
the NetBEUI protocol. If not, FastManage will not perform any SNMP
over NetBIOS operation. This protocol is checked if IP was selected
during setup.
• Strict Name Resolution : If this is enabled, all device names
starting with SNMPA will be treated as NetBIOS names. The “Enable
NetBIOS” parameter must be selected to enable this option. Checked by
default.
• Do NetBIOS Discovery : If this parameter is chosen, the software
uses SNMP over NetBIOS to find all devices that respond. The “Enable
NetBIOS” parameter must be selected to enable this option. Not
checked by default.
• Default : Initialize all the parameters to default values.
• Save Options : Saves all changes to the issnmp.ini file.
• Cancel : Cancels the changes.