Figure - figure 10-4. ip traps manager, Figure - figure 10-5. traps found screen, Heading2 - 10.3.2 uptime – Digi MIL-3000FTX User Manual
Page 102: Heading2 - 10.3.3 reset, Heading2 - 10.3.4 digi logo, Uptime -3 reset -3 digi logo -3
MIL-3000FTX Series of FastPort Print Servers
10-3
Note:
Refer to section 10.4.1 for information on the TCP/IP Config. sub-menu’s options.
The following screen appears:
Figure 10-4. IP Traps Manager
2. Enter your host address into the “IP Trap Host 1” line and click
Set
.
FastManage now notifies you when a trap occurs. Now click the
“Traps” hot spot, the software will list all traps found.
Figure 10-5. Traps Found Screen
10.3.2Uptime
Uptime displays how long the device has been running in days, hours,
minutes, and seconds. Click once when there is a box around “Uptime”
and the “Session Windows Caption” screen appears.
10.3.3Reset
When this is clicked on, a warning message appears asking whether or not
the user want to reset FastPort. Select
Yes
to continue,
No
to stop.
10.3.4Digi Logo
A Digi logo appears on the graphic (Figure 10-2). When this logo is clicked
on, FastPort specifications appear. Reset
Name
,
Location
, and
Contact
.
Press
Set
after you make changes.