Digi MIL-3000FTX - Manual (Page 80)

MIL-3000FTX Series of FastPort Print Servers 8-1
C h a p t e r 8
FastManage Installation
Chapter 8 has information for the FastManage software.
8.1 FastManage Applications
• Discovery Application: This is used to find devices that have an SNMP
agent on the network.
• Ping Application: This is a stand-alone program for debugging. Users
“ping” to an IP address
• BOOTP Server: This allows users to assign IP addresses dynamically to
the devices on the network
• FastPort PrintServer Mgr: This application is used to find and maintain
FastPort print servers
• On-line Help: A list of available help option appear
• Uninstall FastManage: Removes FastManage
• Stackable HUB_MCS Mgr: This application is used to find and
maintain hubs and media converters
• Readme: Notes the latest features of FastManage
8.1.1 FastManage MIBs
FastManage utilizes the RFC 1517 MIB for SNMP compliance. FastManage
also uses the
repeater.mib and the private.mib for the hub line, as
well as the parallel.mib , serial.mib , and private.mib for the print
server line.
8.1.2 FastManage Requirements
FastManage runs as a stand-alone tool (i.e., no other TCP/IP packages
required). However, if a system has any Winsock™ compatible TCP/IP
stacks (i.e., PC/TCP™, Chameleon™, or LAN Workplace™) or Microsoft
TCP/IP stack, it can co-exist with these packages. FastManage runs on the
top of public domain packet drivers as well as on the top of ODI drivers.