Figure - figure 9-6. snmp fault trace message, Heading - 9.5 parameters pull-down menu, Heading2 - 9.5.1 general parameters – Digi MIL-3000FTX User Manual
Page 95: Figure - figure 9-7. general parameters menu, Parameters pull-down menu -8, General parameters -8
Advertising
MIL-3000FTX Series of FastPort Print Servers
9-8
Note:
This only works if IPX is enabled in the
General Parameters
(under the
Parameters
pull-down menu).
Figure 9-6. SNMP Fault Trace Message
9.5 Parameters Pull-Down Menu
There are a variety of options that can be configured from the Parameters
pull-down menu, including:
9.5.1 General Parameters
To configure the General Parameters section: From the “Parameters” pull-
down window, select
General Parameters
(Figure 9-7). The following
are its options:
Figure 9-7. General Parameters Menu
Advertising