Digi MIL-3000FTX - Manual (Page 149)

MIL-3000FTX Series of FastPort Print Servers G-7
<enter> (don't change/continue)
G.9.1.1 D isplay/Set for MIL-3110FTX and MIL-3111FTX,
Current Parallel port config.:
mode setup (us)strobe (us)console/test page
Fast-DMA 3 3 PostScript
Parallel port mode:
1.(Standard)
2.(Fast-DMA)
3.(AutoStrobe)
4.(Use-Ack)
<enter> (don't change/continue)
Number of us data setup (default=3, max = 16)
Number of us strobe delay (default=3, max = 16)
Parallel console/test page
1.(PostScript)
2.(Ascii text)
<enter> (don't change/continue)
New Parallel port config.:
mode setup (us)strobe (us)console/test page
Fast-DMA 3 3 PostScript
Select parallel console/test page type:
1.(PostScript)
2.(Ascii text)
<enter> (don't change/continue)
New Parallel port 1 config.:
mode setup/strobe (us)console/test page
Standard 2.7 PostScript
G.10 S—Display/set Serial Port Parms
Current
Serial port 1 config:BaudDataStopParityFlow
96008 1 NoneXon/Xoff
Modify?, yes or no (y or n)?:n