Beisler 1282-4 - Manual (Page 19)

Closing Seam Machine 1282-4 Working Instructions
- 10 -
Beisler Automated Sewing Equipment
B.2
Functions of the machine
Fig. 10
Fig. 10
Symbol bar
The symbol bar 7 indicates menus that can be reque-
sted directly from the start menu using the function
keys.
All other functions of the machine can be set or chan-
ged by selecting the corresponding menus on the dif-
ferent program levels. The corresponding symbols
appear on the display of the operating panel.
B.2.5 Operating panel
Display
During the operation of the machine, the display 1
shows the values of the selected sewing program. If
menus were requested, the menu symbol or the cor-
responding parameters of the function are displayed.
Display
8 Symbol of seam structure of first seam
9 Description of sewing program (a sewing program
may consist of several seams)
a Seam number of sewing program
b Symbol of an enabled sewing function. The sym
bol is displayed inverted.
c Symbol of a disabled sewing function for the
selected seam. The symbol is displayed black
against a bright background.
Memory card slot 2
The memory card is the medium for storing the bak-
kup copies of all program control data. Programs can
be copied to and stored on the memory card and re-
loaded into the machine control when required.
Program stop switch
If the program stop switch 3 is pressed during the
operation of the machine, all machine movements and
the sewing process are stopped.
Numeric keypad
The numeric keypad 4 is used to enter all change-
able number values.
By pressing the M key, you can request the desired se-
wing programs.
By pressing the P key, you can request submenus, con-
firm inputs and exit the programming mode.
Arrow keys
By pressing the UP or DOWN arrow key 5 , you can
move the cursor in the selected menu one line up or
down.
By pressing the RIGHT or LEFT arrow key, you can
mark the desired parameter in the selected menu using
the cursor or browse forward or backward if the para-
meter list consists of several pages.
Function keys
You can use the function keys 6 to request the me-
nus for setting or changing machine functions on the
selected level.