Beisler 1282-4 - Manual (Page 39)

Closing Seam Machine 1282-4 Working Instructions
- 10 -
Beisler Automated Sewing Equipment
C.5
Maintenance
C.5.3 Service
The following service works must be carried out in weekly
intervals.
Oiling the rails:
1. Disconnect machine from power supply.
2. Wipe guide clamp guide rail using a clean, oil-saturated
cloth.
3. Wipe contour guide X and Y rail using a clean, oil-sa-
turated cloth.
NOTE - Oil supply!
The scope of delivery comprises 0.25 l of oil. When this
oil is used up, you can order the special machine oil for
service from the manufacturer or supplier of the
machine.
Emptying the water separator:
1. Disconnect machine from power supply.
2. Fig. 5: Drain water at pressure reducer water separator
into suited container.
Press button
1 at pressure reducer collector and keep
pressed until all the water has been drained.
Sewing head service:
NOTE - Sewing head service instructions!
For information about service of the sewing head, plea-
se refer to the working instructions of the sewing head.
Fig. 5
Fig. 5